MonthMarch 2016

New GreenTec Filament from Extrudr

GreenTec 02 GreenTec 01 Greentec 03

 

 

 

 

On the left printed @0.15mm Layer height with an 0.5mm nozzle on my DuoCore @210°C. On the right printed @0.2mm Layer height with an unknown nozzle @200°C on a friends i3. What is interesting are the differences in slicing, the left was sliced using S3D, the right one with Slic3r.

I was very positively surprised by the new GreenTec filament from Extrudr, that i ordered on a whim alongside a couple of kilos of my usual ABS.

Not only does it produce a nice matte finish, it prints without any hint of warp, the stability is excellent and it is a dream to postprocess with any kind of tool.

The only two drawbacks i found so far are that it sticks so strongly to the printplate (aluminum with 3Dlac @60°C) that damage to the part or printplate are a very real threat and the current price of €56 / Kg

I hope the price goes down over time, but even at the premium it might be worth it, especially considered that i don’t have to feel so bad about producing garbage prints since GreenTec decomposes neatly, different to PLA.

biodegradable plastics

Thermal Runaway – Silicone cover to the rescue

Silicone Cover after Thermal Runaway

Silicone Cover after Thermal Runaway

As it turned out, it was a lot earlier than expected that the silicone sleaves from this posting

Silicone Sleave for Merlin made the trouble worthwhile. Some peculiar behavior of Marlin lead to a thermal runaway for a couple of seconds at full power. The silicone, that is rated for 450°C deteriorated, but the extruder remains unharmed and even the hotend survived thanks to the new cooling.

For those interested, what happened was that while homing Z Marlin stopped working completely. Everything was frozen including menu and the PID for the hotend, which got stuck with the heater switched on. I haven’t found the reason for the behavior yet, but i’ll do the homing before the heating in the foreseeable future.

© 2017 Bonkers

Theme by Anders NorénUp ↑