mat_FPE01First test print with FPE Naturel – Shore 40D
The brown border at the bottom is residue from printing Lay wood before. It turned out that this residue made the FPE stick nicely to the plate, later tests with pure FPE did not work as nicely.

Filament Diameter: 1.71 mm
Nozzle Diameter (Set): 0.2 mm
Nozzle Diameter (Used): 0.2 mm
Nozzle Temperature: 215
Bed Temperature: 100
Bed Surface: Aluminium with Water/Woodglue (3:1)
Layerheight: 0.2 mm
Infill: 100%
Perimeter Speed: 5 mm/s
Infill speed: 7,5 mm/s
Retract: 3 mm