mat_HIPS01Filament Diameter: 1.71 mm
Nozzle Diameter (Set): 0.2 mm
Nozzle Diameter (Used): 0.2 mm
Nozzle Temperature: 230
Bed Temperature: 100
Bed Surface: Thermoplast (Warp)
Layerheight: 0.2 mm
Infill: 100%
Perimeter speed :20 mm/s
Infill speed: 60 mm/s
Retract: 3 mm

Similar to the Nylon i had a bit of a problem with HIPS sticking to the printing plate, but nowhere near as much.
The results are very encouraging, i like the material from it’s visual and haptic properties, it seems to be very stable.